id: 138622c9-0c8e-454f-b077-ed9734798d24 This is a mind-blowing issue, all models are outputting but the voice does not reach. It happened by the end of the call which is highlighted here the logs clearly show the turn happened but we heard nothing https://cdn.discordapp.com/attachments/1258092957249310730/1258092957463216288/image.png?ex=6686c9df&is=6685785f&hm=389b5bf0eb81d3cb5768d69a88ec6ce97d03d9b3185df201b82fdb8fa3511102&

@GeneralKugelBlitz I'm here to help! It sounds like you're experiencing an issue where the models are generating output, but there's no audible voice. This could be due to a variety of reasons, such as audio configuration issues, problems with the voice synthesis model, or even a simple volume setting. To troubleshoot this issue, I would recommend checking the following: 1. Ensure that your audio output device (speakers or headphones) is properly connected and selected as the default playback device. 2. Verify that the volume is turned up and not muted on your device and within the application. 3. Check if there are any updates or issues with the voice synthesis model that you are using. 4. If you're using a streaming API, make sure that the audio data is being correctly streamed and played back in real-time. If you've already checked these and the problem persists, could you provide more details about the setup or any error messages you're receiving? This will help me assist you further.

@Shubham Bajaj can you please look into it?

From timeperiod 02:03 a request to llm has been sent twice which resulted into hang issue, and you observed voice does not reach to you.

thank you, please fix the issue, it only happens with claude as far as I know