@Vapi I am using the prompt as follows:- [Identity] You are Lisa, an AI voice assistant to help users generate a quotation to provide an estimation of installing solar panels on their rooftops. [Task] 1. Ask the user their name: "To get started, can I have your name?" 2. Once you have their name, ask their address: "Can you please let me know the address where you want to get the solar installed? Please include house number, street name, city, and state." 3. Trigger the getGeocodedAddress tool using the provided address. 4. If the response is successful, parse the details like city, country, googlePlaceId, latitude, longitude, postalCode, state and streetName from the response. 5. Now trigger the tool 'getAddress' using the above details like city, country, googlePlaceId, latitude, longitude, postalCode, state and streetName. 6. From the response of

getAddress

, parse the data.address_id . 7. Now ask user for their monthly electricity bill in dollars. 8. Use the

createProposal

tool with the following inputs: - `addressId`: Use the address_id from the previous tool response. - `annualConsumptionInWh`: 0. - `avgMonthlyBillInDollars`: user will tell this. - `customerName`: Retrieve from conversation. - `organizationId`: "674eb324343c73b7ec34ce79". 9. Say: "Thank you for providing the information. I am evaluating weather data, your home rooftop, and solar radiance to generate a solar quotation. Please wait for a few seconds." 10. End the call. But in this, the tool createProposal is not able to parse addressId from the response of getAddress Please help

@Suraj_Kumar It seems like there might be an issue with how the

addressId

is being handled between the

getAddress

tool and the

createProposal

tool. To ensure that the

addressId

is correctly parsed and passed to the

createProposal

tool, you might want to double-check the following: 1. Ensure that the

getAddress

tool is being called with the correct parameters and that it is returning a successful response with the necessary data. 2. Verify that the

addressId

is being correctly extracted from the

getAddress

tool's response. 3. Confirm that the

addressId

is being passed in the correct format to the

createProposal

tool. If you've checked these steps and the issue persists, there might be a technical glitch or a requirement for additional troubleshooting. In such cases, it's best to reach out to the support team with specific details of the issue for further assistance. Please ask support for more info on this.

The response from getAddress tool is { "status": "success", "message": "address saved successfully", "data": { "address_id": "67611a8e96c96c57ef98be59" } } @Vapi

@Suraj_Kumar Great! It looks like the

getAddress

tool is working correctly and has provided you with an

address_id

. You can now use this

address_id

as a parameter for the

createProposal

tool. Make sure to pass the

address_id

value exactly as it is, including any hyphens or special characters, to ensure proper functionality. If you need assistance with the next steps or have any other questions, feel free to ask!

while doing it, the tool createProposal is using addressId as "123456" which is a random value. @Vapi

@Suraj_Kumar It seems there might be a mistake in the way the

address_id

is being passed to the

createProposal

tool. You should ensure that the

address_id

you received from the

getAddress

tool response is correctly used when calling

createProposal

. Instead of the placeholder "123456", you should use "67611a8e96c96c57ef98be59" as the

addressId

. If you're ready to proceed with the correct

address_id

, I can help you with that. Would you like to go ahead and use the correct

address_id

for the

createProposal

tool now?

Yes

@Suraj_Kumar Great! To proceed with using the correct

address_id

for the

createProposal

tool, you'll need to replace the placeholder "123456" with the actual

address_id

you received, which is "67611a8e96c96c57ef98be59". If you're ready, go ahead and call the

createProposal

tool with the correct

address_id

. If you need any assistance with the call or have any other questions, feel free to ask!

What changes should I do in prompt @Vapi

@Suraj_Kumar To ensure the

createProposal

tool receives the correct

address_id

, you should modify the prompt that calls this tool by replacing the placeholder

addressId

value with the actual

address_id

you received from the

getAddress

tool. Here's how you can adjust the prompt: 1. Identify the part of your prompt or code where

createProposal

is being called. 2. Locate the parameter where

addressId

is set to "123456". 3. Replace "123456" with the actual

address_id

value "67611a8e96c96c57ef98be59". For example, if your current prompt or code looks something like this:

json
{
  "tool": "createProposal",
  "parameters": {
    "addressId": "123456",
    // ... other parameters ...
  }
}

You should change it to:

json
{
  "tool": "createProposal",
  "parameters": {
    "addressId": "67611a8e96c96c57ef98be59",
    // ... other parameters ...
  }
}

Make sure to include any other necessary parameters that the

createProposal

tool requires. Once you've made this change, you can execute the prompt, and the

createProposal

tool should use the correct

address_id

. If you need further assistance with this process or have any other questions, please let me know!

@Vapi I am using VAPI dashborad for this

@Suraj_Kumar If you're using the VAPI dashboard to interact with the tools, you'll need to manually update the

addressId

field when setting up the

createProposal

action. Here's what you should do: 1. Navigate to the section of the VAPI dashboard where you can initiate the

createProposal

tool. 2. Look for the input field where

addressId

is entered. 3. Replace the placeholder value "123456" with the actual

address_id

you received, which is "67611a8e96c96c57ef98be59". 4. Ensure all other required fields are filled in correctly. 5. Submit the action to execute the

createProposal

tool with the correct

address_id

. If you encounter any issues or if the dashboard does not seem to be updating the

addressId

correctly, it might be a good idea to reach out to the VAPI support team for assistance. They can guide you through the process or help resolve any technical difficulties you might be facing. Should you need further clarification or help, please let me know!

@User Please help here

Hey @Suraj_Kumar To help track down this issue, could you share: - The call ID - When exactly this happened (the timestamp) - What response you expected to get - What response you actually got instead This would really help me figure out what went wrong!